| Directions: | 1、this machine is the type of friction hot-melting, through
high-speed to reach the goal of overlapping the plastic strap and
then agglutination. So it is called friction hot-melting.
2、induces the condensation into the cylinder pistol which is
connection with the top part of the oscillator via the axis. The
oscillator vibrates come-and-go so as to press the friction slice
to make the overlapping enlacing strap agglutinate.
3、there is a oval hole in the middle of the oscillator, and the
deviating mandrel of the wind-leaf motor rotates in the hole back
and forth.
4、the pneumatic motor rotates in a high speed and the max speed is
up to 10,000rpm so as to make the oscillator move like the
pendulum.
5、the lower strap is fixed on the board by the triangle tooth-shape
of the bottom die; And the higher strap agglutinates with the lower
for friction heat from vibration of the oscillator triangle
tooth-shape and the friction of the two straps.
6、the overlapping part of the enlacing strap is fusing at the
joint. The machine will stop when the vibration time is over, and
then the felting is finished.
7、The two straps is fixed in high pressure, and we should wait for
several second to make sure the felting position cool down.
Plastic metal strap/PET packaging strap is the latest bundling
strap which is popular in the international market and it is to
replace the steel strapping band, and it is widely used in
industries such as steels, aluminum materials, fabric, cotton
spinning, tobacco, papermaking, making jar in metal, and so on.
1、strong resistant pulling power: It owns not only resistant
pulling power like steel strap, but also has ductility which can
resist colliding, and can ensure the transportation safety of the
products
2、small percentage elongation ：the percentage elongation is just
one sixth of the polypropylenes (PP) strap, and can keep the
straining power for a long time.
3、strong hot bearing：the melting point is 260 degrees, there is no
distortion under the condition that the temperature is lower than
120 degrees.
4、good flexibility ：the edge of the strap is not sharp like the
metal strap, so its operation is safety and there is no damage to
the bundled goods.
5、stainless and good-looking：no fault that metal strap polluting
the bundled goods and the color is brightness enough to reflect.
6、fine economic benefit ：the length of one ton plastic metal strap
is equal to 6 tons metal strap, but the unit price (per meter) is
lower than the metal strap, so you can reduce the cost.
width: 9-32mm
Thickness: 0.5-1.2mm
colors: green, black, transparent
Surface: smooth or stamping
|
| others: | ELIDA packaging machinery CO.,LTD
Specially produce all kinds of packing machines, packing
equipments, packing materials and automatic assembly line,
transport machine and production line.
Main products: automatic packer, PET plastic metal band packer,
on-buttoning metal strap packer, pneumatic metal packer, heat
shrinkable packer, capper, automatic sealer, pneumatic tacking-case
machine, skin packer and blister sealer, sucked plastic packing
sealer, printing code machine, hand-holding printing icon machine,
vacuum packer, outside pumping vacuum packer, heat melting glue
machine, high frequency sealer plastic melting joint machine,
tensile film twister, supporting plate automatic packer, metal with
electricity labeling machine, electricity erosion marking machine,
folding paper machine, metal band scissors, assembling line,
transportation machine, strap production line, lettering packing
strap, PET plastic metal strap, lettering sealing glue, PE tensile
film, heat shrinkable film, PE protective film, scissors and the
packaging machinery fittings.
ELIDA packaging machinery CO.,LTD
ADD: No.85-87, Longjin avenue. Nanzhuang town, Chancheng District,
Foshan City, Guangdong Province, China
TEL0086-757-85395000FAX0757-85320729
http://www.elida.cnE-mail：elida@126.com
|
